PROsorb in moisture stabilizer sheets, even custom shapes

PRODUCT AVAILABLE ONLY BY ORDER.

PROsorb sheets can be supplied with a pre-conditioning of 35% - 40% - 45% - 50% - 55% - 60% RH (relative humidity).

Composition material: PP-honeycomb, coated on one side with a non-woven polyester, and on one side with Marvelseal 360.

10 mm sheets contain about 3.5 kg PROsorb / m². The total weight is about 5 - 5.5 kg / depending on the conditioning.

20 mm sheets contain about 7.5 kg of PROsorb / m². The total weight is about 10.5 - 12 kg / m² depending on the conditioning.

The PROsorb sheets and their polyester coating were tested according to the "Oddy Test" in 2011 and are safe for permanent use in museum showcases. The Marvelseal aluminum film is heat-sealed, without the addition of additional products. The Marvelseal film is folded around the edges and covers about 10 mm of the front side too. The outer edges (approx. 10 mm) of the sheets do not contain PROsorb - and can be used to fix the sheets to a wall, etc.

The edges are reinforced with 3M # 425 aluminum tape (Oddy tested).

The conditioning, weight and year of production are shown on the back of each sheet. We deliver the sheets sealed in aluminum foil.

Round sheets or other forms can be produced on request, send us your projects / drawings to request a quote.

The sheets are not completely dust-proof, so they should not be used over artwork!

PROSORB CHARACTERISTICS:

PROSorb is a particular and precious silica gel that must be expressly used in those areas in which it is necessary to stabilize a percentage of humidity, rather than breaking it down as much as possible to a minimum.

PROSorb is therefore highly suitable for stabilizing the percentage of relative humidity in display cases or other containers that preserve artifacts, art objects, old books, wooden artefacts or any other material which, due to its delicacy or particular historical-artistic value it must be constantly stored in a constant humidity atmosphere.

The function of the PROSorb is therefore to maintain and control the percentage of humidity, preventing excessive levels but at the same time counteracting excessive lowering towards an environment that is too dry, which would cause as much damage.

The ideal level of humidity for most museum displays and cabinets is between 40-60% HR (relative humidity). PROsorb has a unique and exceptional absorption capacity in the 40-60% HR range and exceeds all products sold for this purpose.

For this peculiar feature, PROSorb is widely used in the restoration, conservation of cultural heritage and in the exhibition / museum sector, also due to the fact that PROsorb:

It is harmless: the particular silica gel used in this product is absolutely harmless and does not contain chlorides, additives or harmful, irritating or potentially harmful objects. Chemically it is a preparation with the formula 97% SiO2 and 3% Al2O3

Low abrasion: the beads of PROSorb produce less dust than other silica gels.

Compact: PROsorb has a high density, 1 kg of PROsorb occupies only the volume of 1.5 Lt.

Long-term stable: PROSorb retains its absorption capacity longer than other products. After 10 years it was verified that the absorption capacity of PRO SORB had decreased by only about 20% (kept in its unopened package). Values ​​may depend on environmental conditions.

Economical: PROSorb is much cheaper than other products sold for the same purpose.

Temperature Sensitive: PROSorb is conditioned in relation to temperature. PROSorb reacts in the same way as organic materials, so there will be little or no transfer of water vapor between organic materials and PROSorb if the temperature changes. With fluctuating temperatures, this property will protect wooden objects and other organic materials from swelling or contracting. The conditioning indicated on the labels refers to 20 ° C. At 10 ° C the conditioning of the boxes will be about 1-1.5% lower RH, while at 30 ° C about 1 - 1.5% higher RH.

CONTACT US for more information or for a quotation